>>35668
алсоу, собрал сейчас дзен-едро, там есть новый менеджер процессора и памяти. сейчас опробуем это чудо расчудесное.
хм.
smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3250820AS
Serial Number: 5QE0GKCM
Firmware Version: 3.AAD
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jul 20 05:34:51 2010 NOVST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 095 006 Pre-fail Always - 181339126
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1903
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 060 059 030 Pre-fail Always - 3453960793760
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13355
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2288
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 050 045 Old_age Always - 36 (Lifetime Min/Max 30/39)
194 Temperature_Celsius 0x0022 036 050 000 Old_age Always - 36 (0 15 0 0)
195 Hardware_ECC_Recovered 0x001a 062 053 000 Old_age Always - 212918026
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 70
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 69 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 69 occurred at disk power-on lifetime: 13344 hours (556 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 a0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 20 01 01 00 00 a0 00 00:00:11.719 READ DMA
ef 03 46 01 10 00 a0 00 00:00:11.471 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 00:00:06.071 SET FEATURES [Set transfer mode]
c6 d8 10 01 4f c2 a0 00 00:00:12.094 SET MULTIPLE MODE
b0 da 00 01 4f c2 a0 00 00:00:12.093 SMART RETURN STATUS
Error 68 occurred at disk power-on lifetime: 6828 hours (284 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 07 08 b0 e0 Error: ICRC, ABRT at LBA = 0x00b00807 = 11536391
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 00 08 b0 e0 00 00:01:06.952 READ DMA EXT
25 00 08 00 08 ac e0 00 00:01:06.943 READ DMA EXT
25 00 08 00 08 a8 e0 00 00:01:06.933 READ DMA EXT
25 00 08 00 08 a4 e0 00 00:01:06.923 READ DMA EXT
25 00 08 00 08 a0 e0 00 00:01:06.914 READ DMA EXT
Error 67 occurred at disk power-on lifetime: 6828 hours (284 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 37 8c 00 e0 Error: ICRC, ABRT at LBA = 0x00008c37 = 35895
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 30 8c 00 e0 00 00:00:55.569 READ DMA
c8 00 20 78 8b 00 e0 00 00:00:55.575 READ DMA
c8 00 08 70 8b 00 e0 00 00:00:55.575 READ DMA
c8 00 20 d8 8a 00 e0 00 00:00:55.574 READ DMA
c8 00 08 d0 8a 00 e0 00 00:00:55.574 READ DMA
Error 66 occurred at disk power-on lifetime: 6828 hours (284 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 0f 91 6b 00 e0 Error: ICRC, ABRT 15 sectors at LBA = 0x00006b91 = 27537
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 80 6b 00 e0 00 00:00:54.544 READ DMA
c8 00 08 78 6b 00 e0 00 00:00:54.544 READ DMA
c8 00 20 50 6b 00 e0 00 00:00:54.542 READ DMA
c8 00 08 48 6b 00 e0 00 00:00:54.542 READ DMA
c8 00 20 c0 69 00 e0 00 00:00:54.541 READ DMA
Error 65 occurred at disk power-on lifetime: 6828 hours (284 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 cf 11 09 00 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x00000911 = 2321
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 60 08 00 e0 00 00:00:48.418 READ DMA EXT
25 00 08 70 4e 1c e0 00 00:00:48.417 READ DMA EXT
25 00 08 00 4f 1c e0 00 00:00:48.395 READ DMA EXT
25 00 08 c0 4f 1c e0 00 00:00:48.395 READ DMA EXT
c8 00 40 20 08 00 e0 00 00:00:48.384 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13355 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.